JS_1

Modern Race Car Jack Stand

JS_3

Economy Race Car Jack Stand

The JS_3 is for the builder with a budget. Designed and 3D resin printed by Ron Coon Resins. Dimensions are as follows, height = 12.83mm while the base is 10.45mm x 10.45mm.

Just $3.50 for a set of 4 plus shipping.

JS_4

Race Car Jack Stands

The JS_4 could be used in any situation but are a must for you dirt track guys. Didn’t take long as a dirt track racer to figure out that normal jack stands were dangerous due to them sinking into the dirt, so we started welding a plate to the bottom to keep them from becoming unstable. Overall height is 17.4mm and is not adjustable. 1:25 scale / 1:24 scale. Printed by Ron Coon Resins.

Just $4.99 per set of 4 plus shipping.

DRA_1

Trophies

Every diorama needs some trophies! Designed and 3D resin printed in 1:25 / 1:24 scale by Ron Coon Resins. The DRA_1 comes as a set of three. Dimensions are Height = 15.7mm, Width = 8.5mm, and Depth = 5mm.

Hood not included. Items come bare gray resin, black washed for photo purposes.

Just $2.25 per set plus shipping.

DRA_2

Aluminum Cans

Every diorama needs some beverage can! 1:25 / 1:24 scale 3D resin printed by Ron Coon Resins. It is recommended to not paint the tops of cans but give them a light black wash instead. Part number is for a set of 6 cans.

Just $.99 per set plus shipping.

DRA_3

Old Tire Stack

Every shop, garage, or race track diorama needs a stack of wore out tires whether they be in the corner, against the building, or surrounding a post. Stack is one piece and overall dimensions are Height = 25.4mm and Diameter = 28.3mm. 1:25/1:24 scale 3D resin printed.

Black washed for photo purposes. Item comes bare gray resin

Just $ 2.99 plus shipping.

TR_1

Flywheel and Clutch

How cool is this? This one piece flywheel / clutch would make a great addition to any diorama whether installed on a motor or sitting on a bench. Dimensions are 14mm x 2.8mm. Designed by Motabas Yen and 3D resin printed by Ron Coon Resins.

Just $1.50 per pair plus shipping.

Engine block and oil pan not included.

JMX_1

Dirt Late Model Chassis

The JMX_1 is Dirt Late Model Chassis designed by Justin Thomas at JMAXX Race Cars, and 3D resin printed by Ron Woodard Jr. at WFC Motorsports, exclusively for Ron Coon Resins. The JMX_1 was developed for diorama purposes, no parts will be designed to go with it. Overall dimensions are as follows; LENGTH = 6 11/16″, WIDTH = 2 5/8″, HEIGHT = 1 3/4″.

Just $18.00 per chassis plus shipping.

Item comes bare resin.

DRA_4

Fuel Jugs

Every diorama needs some fuel jugs!!! 3D resin printed by Ron Coon Resins. Dimensions are 10.8mm x 10.8mm x 22mm. Items ship on supports.

Just $2.00 per pair plus shipping.

LP_1

Motor Lift Plate

The LP_1 is a motor lift plate used by most racers to remove and install motors. It also serves as an intake block off plate for motor storage.

Designed and 3D resin printed by Ron Coon Resins.

Intake not included, black washed for photo purposes only. Items comes bare gray resin.

Just $.75 each plus shipping.

H_1

Full Faced Helmets

H_1 These cool looking Full Faced Helmets with air intake would look great in any diorama.

Just $1.25 each plus shipping.

AIR_1

Wall Mount Climate Control Unit 

AIR_1 Why hasn’t anyone thought of this before? The AIR_1 is a Wall Mount Climate Control Unit for your diorama. Now you can be comfortable year round in your diorama garage. Kit comes with unit, bare metal foil, and a decal. Measures 1 5/32″ wide, 3/4″ high, 19/64″ deep at vent.

Just $3.50 for the kit plus shipping.

Unit painted for display purpose only. 

CB_1

The Concrete Block

A concrete block is a diorama staple!  Item comes bare resin. Part number is for 1 block.

Just $ .66 each plus shipping.

AIR_1

Wall Mount Climate Control Unit 

AIR_1 Why hasn’t anyone thought of this before? The AIR_1 is a Wall Mount Climate Control Unit for your diorama. Now you can be comfortable year round in your diorama garage. Kit comes with unit, bare metal foil, and a decal. Measures 1 5/32″ wide, 3/4″ high, 19/64″ deep at vent.

Just $3.50 for the kit plus shipping.

Unit painted for display purpose only.