T_Trailer

One Piece Trailer Tire/Rim/Backing Plate

 The T_TRAILER is an  affordable 1 piece tire/rim/backing plate for the builder looking to do a trailer build. You have seen these on open and enclosed trailers up and down the Interstate all across the country! Tire measures 1 1/16” in diameter, 3/8” sidewall to sidewall, 7/16” overall depth with axle spud.

Just $4.50 each plus shipping.

T_Trailer2

Trailer Tire and Wheel

T_Trailer2  WFC Motorsports knocked it out of the park with this trailer tire and separate wheel! Everyone is into trailers for their builds these days and WFC Motorsports delivered. Part number consists of two commercial grade tires and two 8 hole wheels. Backside of tires will require slight sanding. Designed and 3D resin printed by WFC Motorsports. Tire dimensions are 27mm in diameter with a 9mm width. Our W_36 axles will fit the T_Trailer2.

Just $7.50 per set plus shipping.

T_2

Pavement Tire, 1 5/16″ Diameter

T_2 Pavement Tire could be used for Circle Track or Drag Racing. Measures 1 5/16″ in diameter, 11/16″ contact patch, 13/16″ sidewall to side wall,  5/8″ center hole.

Just $2.50 each plus shipping.

Item comes unpainted.

T_1

Pavement Tire, 1 3/16″ Diameter

T_1 Pavement Tire could be used for Circle Track or Drag Racing. Measures 1 3/16″ in diameter, 7/16″ contact patch, 9/16″ sidewall to sidewall, 5/8″ center hole.

Just $2.50 each plus shipping.

Item comes unpainted.

T_2

Pavement Tire, 1 5/16″ Diameter

T_2 Pavement Tire could be used for Circle Track or Drag Racing. Measures 1 5/16″ in diameter, 11/16″ contact patch, 13/16″ sidewall to side wall,  5/8″ center hole.

Just $2.50 each plus shipping.

Item comes unpainted.

T_2

Pavement Tire, 1 5/16″ Diameter

T_2 Pavement Tire could be used for Circle Track or Drag Racing. Measures 1 5/16″ in diameter, 11/16″ contact patch, 13/16″ sidewall to side wall,  5/8″ center hole.

Just $2.50 each plus shipping.

Item comes unpainted.

T_3

Goodyear Blue Streak-Style Tire

T_3 This is possibly the most versatile tire ever made. This is similar to the Goodyear Blue Streak found in endless kits. This would be great as a Modified, Hobby Stock, Street Stock, Muscle Car, dirt or pavement,etc. tire!!!

Tire measurements:

• center hole 5/8″ (can be sanded to accept NASCAR wheels)
• 1 3/32″ diameter
• 19/32″ tread
• 5/8″ sidewall to sidewall.

Wheel not included.

Just $2.50 each plus shipping.

Painted to show detail, tire comes unpainted.

T_4

Chain Link Dirt Tread Tire, 1 9/32” Diameter

T_4 This is a Chain Link Dirt Tread pattern that is slightly smaller than the rear tires offered in the popular Tobias East Coast Modified type kits.

Dimensions are:

• wheel hole  5/8”
• diameter 1 9/32”
• tread = 5/8”
• sidewall to sidewall = 23/32″

Cast for standard 1:25 scale wheels, but can be opened up for any wheel up to a 1:24 NASCAR wheel. 

Just $2.50 each plus shipping.

Item painted to show detail, tire comes unpainted.

 T_5

Chain Link Dirt Tread Tire, 1 11/32” Diameter

T_5  This is a Chain Link Dirt Tread pattern that is a direct replacement for the rear tires offered in the popular Tobias East Coast Modified type kits.

Dimensions:

• wheel hole 5/8”
• diameter 1 11/32”
• tread 23/32”
• sidewall to sidewall  13/16”

Cast for standard 1:25 scale wheels, but can be opened up for any wheel up to a 1:24 NASCAR wheel.

Just $2.50 each plus shipping. 

 Item painted to show detail, tire comes unpainted.

T_6

Dirt Tire for 1:25 scale NASCAR Kit Wheels

T_6 FINALLY someone has made a Dirt Tire that will accept 1:25 scale NASCAR Kit Wheels and backing plates without needing any modifications. With some slight sanding to the hole you can use a 1:24 scale wheel. Standard 5/8″ kit rims as well as Ron Coon Resins wheels can be used but will require the use of gel super glue or 5 minute epoxy to adhere the rim in the tire. The tire measurements are as follows; diameter 1 3/16″. tread 1/2″, and sidewall to sidewall 5/8″. 

Just $2.50 each plus shipping.

Tires painted and rim installed for display purpose only. 

T_8

Dirt Track Pattern Tire, 1 1/8″ Diameter

T_8 The T_8 is a Dirt Track Pattern Tire that can be used as a Modified Front or Rear as well as a Late Model / Stock Car Tire. Comes with standard 5/8″ wheel hole but can be sanded to allow virtually any rim.

Tire measurements:

• diameter 1 1/8″
• tread 21/32″
• sidewall to sidewall 11/16″

Just $2.50 each plus shipping.

Tires come unpainted, rims and cars for display purposes only, not included.

T_11

Pavement Tire, 1.087″ Diameter

The T_11 is an awesome addition to any Pavement build.

Dimensions are:

• diameter = 1.087″
• sidewall to sidewall = .74″
• contact path = .64″
• 5/8″ center hole

Shown with W-22 wheel and HB_5 hub, not included, must be ordered separately.

Just $2.50 each plus shipping.

Item comes bare resin, painted for display purpose only.

T_13

Big, Bad, Aggressive Dirt Track Tire

The T-13 is a Big, Bad, Aggressive Dirt Track Tire!  It has a 1:25 scale 5/8″ rim hole, 1 1/4″ diameter, and a 1/2″ contact patch.

Just $2.50 each plus shipping.

Item painted for display purposes only, wheel not included.

T_14

Dirt Track Tire For Street Stocks, Pro Am & More

The T_14 is an Awesome All Around Dirt Track Tire! Great for IMCA & DIRT  Modifieds, Street Stocks, Pro Am, etc. type builds. Has 1:25 rim opening (can be opened for larger rim hole)  1 1/8″ diameter and a  3/8″ contact patch. Use ESW_31 wheel for Wide 5 applications.  Wheels not included.

Just $2.50 each plus shipping. 

Item painted for display purposes, item comes bare resin.

T_15

Hoosier Chain Link Dirt Track Tire

The T_15 is your classic Hoosier Chain Link  type of Dirt Track Tire. Measures 1 1/8″ diameter, 9/16″ tread, 1/2″ bead to bead, and 5/8″ rim hole. Use ESW_31 for Wide 5 wheel applications. Wheel not included, painted for display purposes.

Just $2.50 plus shipping.

Item comes bare white resin.

T_16

Classic Hoosier Chain Link Dirt Track Tire

The T_16 is your Classic Hoosier Chain Link  type of Dirt Track Tire. Measures 1 1/8″ diameter, 11/16″ tread, 9/16″ bead to bead, and5/8″ rim hole. We recommend Elite Series Wheels (ESW_) for Wide 5 applications.Wheel not included.

Just $2.50 plus shipping.

Item painted for display purposes, item comes bare resin.

T_17

Classic Hoosier Chain Link Dirt Track Tire, 1 1/4″ Diameter

T_17 This is your Classic Hoosier Chain Link  type of Dirt Track Tire. Measures 1 1/4″ diameter, 13/16″ tread, 3/4″” bead to bead, and 5/8″ rim hole. We recommend Elite Series Wheels (ESW) for Wide 5 applications.

Just $2.50 plus shipping.

Wheel not included, painted for display purposes. Item comes bare white resin.

T_18

Hoosier Chain Link Tire, 1 1/4″ Diameter

The T_18 is your classic Hoosier Chain Link  type of Dirt Track Tire. Measures 1 1/4″ diameter, 15/16″ tread, 7/8″ bead to bead, and 5/8″ rim hole.  We recommend Elite Series Wheels (ESW) for Wide 5 applications.

Just $2.50 plus shipping.

Wheel not included, painted for display purposes. Item comes bare white resin.

T_DIRT COMBO

Dirt Combo 1

The T_DIRT COMBO 1  is the perfect combination for Circle Track Open Wheel Dirt  builds. Included is one T_15, one T_16, one T_17, and one T_18 giving the builder a left front, right front, left rear, and right rear Hoosier chain link type of tire!  We recommend Elite Series Wheels (ESW) for Wide 5 applications.

Just $10.00 plus shipping.

Painted for display purposes, item comes bare white resin.

T_19

Hargraves Multi Use Slick

The T_19 is an awesome Multi Use Slick originally mastered for Jim Hargraves at Jim’s Outlaws but now available to the world! Measures 1 5/32″ diameter, 21/32″ contact patch, 17/32″ bead to bead, with a 5/8″ rim hole.  Wheel not included.

Just $2.50 each plus shipping.

Item comes bare white resin, painted for display purposes only.

T_20

Exclusive 60s – 80s Tire For Sprints, Supers and Modifieds

The T-20 is a Ron Coon Resins Exclusive! You would find this tire on Dirt Sprints, Supers, and Modifieds from coast to coast during the 60s, 70s and even into the 80s. Measures 1 9/32″ diameter, 1/2″ contact patch, and 1/2″ bead to bead.  Wheel not included.

Just $3.00 each plus shipping.

Painted for display purposes only, item comes bare white resin.

T_21

Diagonal Tread Dirt Tire

The T-21 is a diagonal cut dirt track tire design that is infamous. CAD designed, 3D mastered by WFC Motorsports, and resin cast exclusively by Ron Coon Resins. The T_21 dimensions are as follows. 5/8” center hole, 1 3/16” / 30mm diameter, 5/8” / 15.7mm width.

Just $3.00 plus shipping.

Painted for display purposes, item comes bare white resin. Rim, hub, and decals not included.

T_PT1A

Vintage Pony Tire Assembly

The T_PT1A is a vintage left front pony tire assembly that consists of one tire, one 6 lug wheel, and our popular generic W_8 wheel back. The assembly would also make a great left and right assembly for jalopy and rat rod builds!

Tire dimension is 1 3/32″ / 27.8MM in diameter.

Just $4.30 per assembly plus shipping.

Painted for display purposes. Items come bare white resin, display pedestals not included.

T_PT1B

Vintage Pony Tire Assembly

The T_PT1B is a vintage left front pony tire assembly that consists of one tire, one 6 lug wheel, and our popular HB_8 finned brake drum wheel back. The assembly would also make a great left and right assembly for jalopy and rat rod builds!

Tire dimension is 1 3/32″ / 27.8MM in diameter.

Just $4.99 per assembly plus shipping.

Painted for display purposes. Items come bare white resin, display pedestals not included.

T_PT2A

Vintage Pony Tire Assembly

The T_PT2A is a vintage left front pony tire assembly that consists of one tire, one Ford wide 5 wheel/hub, and our popular generic W_8 wheel back. The assembly would also make a great left and right assembly for jalopy and rat rod builds!

Tire dimension is 1 3/32″ / 27.8MM in diameter.

Just $4.30 per assembly plus shipping.

Painted for display purposes. Items come bare white resin, display pedestals not included.

T_PT2B

Vintage Pony Tire Assembly

The T_PT2B is a vintage left front pony tire assembly that consists of one tire, one Ford wide 5 wheel/hub, and our popular HB_8 finned brake drum wheel back. The assembly would also make a great left and right assembly for jalopy and rat rod builds!

Tire dimension is 1 3/32″ / 27.8MM in diameter.

Just $4.99 per assembly plus shipping.

Painted for display purposes. Items come bare white resin, display pedestals not included.

T_PT3A

Vintage Pony Tire Assembly

The T_PT3A is a vintage left front pony tire assembly that consists of one tire, one 5 lug wheel, and our popular W_8 wheel back. The assembly would also make a great left and right assembly for jalopy and rat rod builds!

Tire dimension is 1 3/32″ / 27.8MM in diameter.

Just $4.30 per assembly plus shipping.

Painted for display purposes. Items come bare white resin, display pedestals not included.

T_PT3B

Vintage Pony Tire Assembly

The T_PT3B is a vintage left front pony tire assembly that consists of one tire, one 5 lug wheel, and  our popular HB_8 finned brake drum wheel back. The assembly would also make a great left and right assembly for jalopy and rat rod builds!

Tire dimension is 1 3/32″ / 27.8MM in diameter.

Just $4.99 per assembly plus shipping.

Painted for display purposes. Items come bare white resin, display pedestals not included.

Whether you are a competition builder or a weekend warrior builder, Ron Coon Resins Elite Series of wheels are for you. 

The Elite Series consists of our own rim shell and lug nut/stud design with detail that will blow you away. All Elite Series wheels begin with the ESW_ prefix.

We will be adding new wheels to the Elite Series as time permits. 

ESW_31

Standard Wide 5 Wheel, 1/4″ Depth

The ESW_31 is a Good Old Standard Wide 5 Wheel! Overall depth is 1/4″.

Just $1.75 each plus shipping.

ESW_32

Standard Wide 5 Wheel, 3/8″ Depth

The ESW_32 is a good old Standard Wide 5 Wheel! Overall depth is 3/8″.

$1.75 each plus shipping.

ESW_33

Standard Wide 5 Wheel, 1/2″ Depth

The ESW_33 is a good old Standard Wide 5 Wheel! Overall depth is 1/2″.

Just $1.75 each plus shipping.

ESW_34

Light Weight Wide 5 Wheel, 3/8″ Depth

The ESW_34 is a 1:25 scale Light Weight Wide 5 Wheel! Overall depth is 3/8″.

Just $2.25 each plus shipping.

ESW_35

5×5 Star Pattern Wheel,  1/4″ Depth

The ESW_35 is a 5×5 bolt pattern star design wheel that would work great on the front of a vintage Modified, Street or Hobby Stock ,as well as a trailer! In house designed and mastered by Ron Coon Resins. Overall depth is 1/4″. 1:25 scale.

$1.75 each plus shipping.

ESW_36

Super Light Weight  Wide 5 Wheel, 3/8″ Depth

The ESW_36 is a 1:25 scale Super Light Weight Wide 5 Wheel! This is not a worked over ASA kit wheel like some are selling. Overall depth is 3/8″.

Tire, tire decal, and hub not included. Item painted for display purposes, comes bare white resin.

Just $1.75 each plus shipping.

ESW_37

6 Pin Modified / Sprint Car Wheel, 1/4″ Depth

The ESW_37 is a 1:25 scale 6 pin Modified / Sprint Car wheel. CAD designed by Dwight Carter at Custom Dirtcars exclusively for Ron Coon Resins. A must for a Batmobile Modified build! Overall depth is 1/4″.

Tire not included. Item painted for display purposes, comes bare white resin.

Just $1.99 each plus shipping.

ESW_38

6 Pin Modified / Sprint Car Wheel, 3/8″ Depth

The ESW_38 is a 1:25 scale 6 pin Modified / Sprint Car wheel. CAD designed by Dwight Carter at Custom Dirtcars exclusively for Ron Coon Resins. A must for a Batmobile Modified build! Overall depth is 3/8″.

Tire not included. Item painted for display purposes, comes bare white resin.

Just $2.20 each plus shipping.

ESW_40

Wide 5 Wheel With Beadlock

The ESW_40 is a 1:25 scale Wide 5 Wheel with beadlock and multiple position stud holes. This will take any build to the next level! 3D resin printed in house by Ron Coon Resins.

The ESW_40 measures 9mm deep from the backside of the beadlock. Will work with all Ron Coon Resins Wide 5 hubs

Tire and tire decal not included. Item black washed for display purposes, comes bare light gray resin.

Just $1.95 each plus shipping.

The Weekend Warrior Line was designed with the shelf builder in mind but with the detail of a competition part!

All Weekend Warrior Line items begin with the WWL_ prefix

We will be adding new Weekend Warrior items as time permits.

NOTE, Weekend Warrior Line wheel/hub items were designed with a slight ridge around the bottom of the rim shell. If this needs to be removed for your particular tire it is recommended that the ridge be sanded not cut to remove for fitment. DO NOT FORCE RIMS INTO THE TIRE HOLE !

WWL_1

Pony Tire 4 Bolt Cap Wide 5

WWL_1  Ron Coon Resins exclusive one piece Wide 5 wheel/hub. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 3MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_2

Pony Tire 8 Bolt Cap Wide 5

WWL_2  Ron Coon Resins exclusive one piece Wide 5 wheel/hub. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 3MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_3

4 Bolt Cap Front Wide 5

WWL_3  Ron Coon Resins exclusive one piece front only Wide 5 wheel/hub. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 6.95MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_4

8 Bolt Cap Front / Rear Wide 5

WWL_4  Ron Coon Resins exclusive one piece front/rear Wide 5 wheel/hub. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 6.95MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_ 5

4 Bolt Cap Front Wide 5

WWL_5  Ron Coon Resins exclusive one piece front only Wide 5 wheel/hub. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 8.86MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_6

8 Bolt Cap Front / Rear Wide 5

WWL_6  Ron Coon Resins exclusive one piece front/rear Wide 5 wheel/hub. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 8.86MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_7

4 Bolt Cap Front Wide 5

WWL_7  Ron Coon Resins exclusive one piece front only Wide 5 wheel/hub. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 12.04MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_ 8

8 Bolt Cap Front / Rear Wide 5

WWL_8  Ron Coon Resins exclusive one piece front/rear Wide 5 wheel/hub. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 12.04MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_ 9

Dust Cover

WWL_9 Generic dust cover. CAD designed resin casted part by Ron Coon Resins.

Just $1.55 each plus shipping. 

Tire not included. Detailed for display purposes only. Item comes bare white resin.

WWL_ 10

Dust Cover

WWL_10 Generic dust cover. CAD designed resin casted part by Ron Coon Resins.

Just $1.55 each plus shipping. 

Tire not included. Detailed for display purposes only. Item comes bare white resin.

WWL_ 11

Dust Cover

WWL_11 Generic dust cover. CAD designed resin casted part by Ron Coon Resins.

Just $1.55 each plus shipping. 

Tire not included. Detailed for display purposes only. Item comes bare white resin.

WWL_12

4 Bolt Cap Front Wide 5

WWL_12  Ron Coon Resins exclusive one piece front only Wide 5 wheel/hub. Designed by WFC Motorsports and 3D resin printed by Ron Coon Resins. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 7MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_ 13

8 Bolt Cap Front / Rear Wide 5

WWL_13  Ron Coon Resins exclusive one piece front/rear Wide 5 wheel/hub. Designed by WFC Motorsports and 3D resin printed by Ron Coon Resins. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 7MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_14

4 Bolt Cap Front Wide 5

WWL_14  Ron Coon Resins exclusive one piece front only Wide 5 wheel/hub. Designed by WFC Motorsports and 3D resin printed by Ron Coon Resins. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 9MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_ 15

8 Bolt Cap Front / Rear Wide 5

WWL_15  Ron Coon Resins exclusive one piece front/rear Wide 5 wheel/hub. Designed by WFC Motorsports and 3D resin printed by Ron Coon Resins. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 9MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_16

4 Bolt Cap Front Wide 5

WWL_16  Ron Coon Resins exclusive one piece front only Wide 5 wheel/hub. Designed by WFC Motorsports and 3D resin printed by Ron Coon Resins. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 12MM.

Just $1.95 each plus shipping. 

Tire not included.

WWL_ 17

8 Bolt Cap Front / Rear Wide 5

WWL_17  Ron Coon Resins exclusive one piece front/rear Wide 5 wheel/hub. Designed by WFC Motorsports and 3D resin printed by Ron Coon Resins. Fits 5/8″ center hole tires minus lower ring, see above Weekend Warrior Line description. Overall wheel height measurement is 12MM.

Just $1.95 each plus shipping. 

Tire not included.

W_3

6 Lug Bolt Pattern Front

W_3  6 Lug Bolt Pattern Front. Fits 5/8″ center hole tires. Measures 5/16″ deep from backside of bead with 1/16″ that could be sanded off.

Just $1.30 each plus shipping.

 Tire not included, item comes unpainted.

The Short Track Series combos were designed with the consignment and shelf builder in mind but with the detail of a competition part!

The Short Track Series  consists of  4 tires, and 4 rims (2 fronts and 2 rears). Designed and 3D printed by WFC Motorsports exclusively for Ron Coon Resins.  All Short Track Series combos will begin with the STS_ prefix.

We will be adding new combos to the Short Track Series as time permits.

If axles are required for your particular build using STS’s take a look down the page at our part number “W_36” axles.

STS_1

Street Stock/IMCA Modified Wheel & Tire

STS_1  The STS_1 is a great wheel/tire combo for anyone wanting to build a dirt Street Stock, IMCA Modified, or early Late Model. Designed and 3D resin printed by WFC Motorsports these 5 hole rims and block pattern tires are a must! Overall dimensions are Diameter = 27.8mm and 14mm wide. Some minor sanding required to remove support markings from one side of tires.

Part number is for 4 tires and 4 wheels (2 fronts and 2 rears).

Just $15.00 per set plus shipping. 

STS_2

Street Stock/IMCA Modified Wheel & Tire

STS_2  The STS_2 is a great wheel/tire combo for anyone wanting to build a dirt Street Stock, IMCA Modified, or early Late Model. Designed and 3D resin printed by WFC Motorsports these 8 hole rims and block pattern tires are a must! Overall dimensions are Diameter = 27.8mm and 14mm wide. Some minor sanding required to remove support markings from one side of tires.

Part number is for 4 tires and 4 wheels (2 fronts and 2 rears).

Just $15.00 per set plus shipping. 

STS_3

Dirt Late Model Wheel & Tire

STS_3  The STS_3 is a great wheel & hub/tire combo for anyone wanting to build a dirt Late Model. Designed and 3D resin printed by WFC Motorsports these block pattern tires with one piece wide 5 hubs and rims are a must!  Dimensions are Diameter = 29.6mm and Tread Pattern = 15mm. Some minor sanding required to remove support markings from one side of tires.

Part number is for 4 tires and 4 wheels/hubs (2 fronts and 2 rears).

Just $15.00 per set plus shipping. 

STS_4

Street Stock/IMCA Modified Wheel & Tire

STS_4 is a great wheel/tire combo for anyone wanting to build a dirt Street Stock, Modified, Pro Stock, etc. 3D resin printed by WFC Motorsports these 8 hole Bassett style rims and Hoosier  pattern tires are a must! Overall dimensions are Diameter = 28.2mm and 12.0mm wide. Some minor sanding required to remove support markings from one side of tires. STS_4 axle hole is slightly larger than 1/16″. Gel CA glue or 5 minute epoxy is suggested if using 1/16″ axle.

Part number is for 4 tires and 4 wheels.

Just $15.00 per set plus shipping. 

STS_2

Street Stock/IMCA Modified Wheel & Tire

STS_2  The STS_2 is a great wheel/tire combo for anyone wanting to build a dirt Street Stock, IMCA Modified, or early Late Model. Designed and 3D resin printed by WFC Motorsports these 8 hole rims and block pattern tires are a must! Overall dimensions are Diameter = 27.8mm and 14mm wide. Some minor sanding required to remove support markings from one side of tires.

Part number is for 4 tires and 4 wheels (2 fronts and 2 rears).

Just $15.00 per set plus shipping. 

STS_3

Dirt Late Model Wheel & Tire

STS_3  The STS_3 is a great wheel & hub/tire combo for anyone wanting to build a dirt Late Model. Designed and 3D resin printed by WFC Motorsports these block pattern tires with one piece wide 5 hubs and rims are a must!  Dimensions are Diameter = 29.6mm and Tread Pattern = 15mm. Some minor sanding required to remove support markings from one side of tires.

Part number is for 4 tires and 4 wheels/hubs (2 fronts and 2 rears).

Just $15.00 per set plus shipping. 

W_1

Exclusive Wide 5 Wheel

W_1  Ron Coon Resins Exclusive Wide 5 Wheel. Fits 5/8″ center hole tires. Measures 7/16 deep from backside of  bead. Has enough material that it could be easily sanded to 3/8″ deep.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_ 2

4 Hole Lug Bolt Pattern

W_ 2  is a 5 Lug Bolt Pattern, 4 hole. Fits 5/8″ center hole tires. Measures 5/16 deep from backside of  bead.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_3

6 Lug Bolt Pattern Front

W_3  6 Lug Bolt Pattern Front. Fits 5/8″ center hole tires. Measures 5/16″ deep from backside of bead with 1/16″ that could be sanded off.

Just $1.30 each plus shipping.

 Tire not included, item comes unpainted.

W_4

Old School Wide 5

W_4  Old School Wide 5. Fits 5/8″ center hole tires. Measures 3/8″ deep from backside of bead with 1/16″ that could be sanded off.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_5

6 Lug Bolt Pattern Rear

W_5   6 Lug Bolt Pattern Rear. Fits 5/8″ center hole tires. Measures 5/16″ deep from backside of bead with 1/16″ that could be sanded off.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_6

6 Lug Bolt Pattern, 5 Hole Tobias Chassis Front

W_6  is a 6 Lug Bolt Pattern 5 Hole Tobias type Chassis Front. Fits 5/8″ center hole tires. Measures 1/4″ deep from backside of bead.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_7

6 Lug Bolt Pattern Rear With Bracing Fins

W_7  is a 6 Lug Bolt Pattern Rear With Bracing Fins. Fits 5/8″ center hole tires. Measures 5/16″ deep from backside of bead with 1/16″ that could be sanded off.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_8

Backing Plate

W_8  Backing Plates. Fits 5/8″ center hole tires. Measures 3/32″ deep from backside of bead. Axle spud is 1/4″. 

Just $ .50 each plus shipping. 

Tire not included, item comes unpainted.

HB_8

Old School Drum and Backing Plate

HB_8 Oh Yeah, Cool Old School Drum Brakes and Backing Plate all in one!!! Will work with all Ron Coon Resin tires to date with the proper adhesive except for the W5_9 tires. If using hollow kit tires these will only work on 5/8″ center holes.

Just $1.20 each plus shipping. 

Tire not included and item does not come painted.

W_9

Wide 5 Tobias Type Chassis Rears

W_9  Wide 5 Tobias Type Chassis Rears, could be used as fronts also. Fits 5/8″ center hole tires. Measures 3/8″ deep from backside of bead.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_10

6 Lug Bolt Pattern Fronts With Bracing Fins

W_10  are 6 Lug Bolt Pattern Fronts with Bracing Fins. Fits 5/8″ center hole tires. Measures 5/16″ deep from backside of bead with 1/16″ that could be sanded off.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_11

5 Lug Bolt Pattern, 5 Hole Cragar /American Racer

W_11  has a 5 Lug Bolt Pattern 5 Hole Cragar /American Racer look. Fits 5/8″ center hole tires. Measures 5/16″ deep from backside of bead.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_12

5 Lug Bolt Pattern 5 Hole Circle Track

W_12 is a 5 Lug Bolt Pattern 5 Hole.  The classic Circle Track look! Fits 5/8″ center hole tires. Measures 1/4″ deep from backside of bead.

Just $1.30 each plus shipping. 

Tire not included, item comes unpainted.

W_14

Classic Magnesium Finned Wide 5 Rim

W_14  The Classic Magnesium Finned Wide 5 Rim. This is NOT the same as the finned wheels found in the Tobias type kits. Fits 5/8″ center hole tires as well as all current RCR resin tires. Measures 13/64″ deep from backside of bead.

Just $1.35 each plus shipping. 

Tire not included, item comes unpainted.

W_15

ASA Kit Style Wide 5 Rim

W_15 This is an ASA Type Wheel that will fit, Revell ASA kit tires, and 1:24 scale NASCAR tires. For hubs go to the Hubs & Brakes page.

Just $1.55 each plus shipping.

Tire not included, item comes unpainted.

W_16

 ASA Type Wheel and Rim Back Half

W_16  is an ASA Type Wheel and the Rim Back Half that will fit Ron Coon Resins T_9 tires, Revell ASA kit tires, and 1:24 scale NASCAR tires. For hubs, go to the Hubs & Brakes section.

Just $1.75  plus shipping.

Painted for display purpose only, item comes unpainted.

W_17

Monogram NASCAR Style Backing Plate

W_17  is a 1:24 scale Monogram NASCAR Style Backing Plate with Molded in Rotor that will fit Ron Coon Resins T_9 tires when  RCR W_15 rims and RCR HB_1 hubs are used, Revell ASA kit tires, and 1:24 scale NASCAR tires. Will not work if HB_2 rotors are used with HB_1 hubs.

Just $ .55 each plus shipping.  

Painted for display purpose only, item comes unpainted. 

W_19

1:24 Scale Backing Plate

W_19 is a 1:24 Scale Backing Plate, same as used in the W5_9′s.

Just $ .55 each plus shipping. 

Painted for display purpose only, item comes unpainted.

W_20

Wheel for RCR T9, Revell ASA,NASCAR & RCR HB1

The W_20 is a wheel that will fit Ron Coon Resins T_9 Tires, Revell ASA Kit Tires, and 1:24 Scale NASCAR Tires, and RCR HB_1 Hubs. Will fit many Ron Coon Resin tires as well, call to see if your particular application will work.   Mastered by Rich Bessom.

Just $1.55 each plus shipping.

Item painted for display purposes, item comes bare resin.

W_21

Wheel with a Rim Back Half for Many Tire Styles

The W_21 is a W_20 Wheel with a Rim Back Half that will fit Ron Coon Resins T_9 tires, Revell ASA Kit tires, and 1:24 Scale NASCAR Tires, and RCR HB_1 Hubs. Will fit many Ron Coon Resin tires as well: call to see if your particular application will work.  Mastered by Rich Bessom.

Just $1.75 each plus shipping.

Item painted for display purposes, item comes bare resin.

W_22

1:25 Scale Wide 5 Rim

The W_22 is a good ol’ 1:25 Scale Wide 5 Rim. The wheel has a 5/8″ OD Rim Shell, 11/32″ depth and Casted Lugs. Use with Ron Coon Resins  hubs HB_1, HB_5, and HB_6. Tire not included.

Just $1.40 each plus shipping.

Painted for display purposes only. Item comes bare resin.

W_23

Beadlock Rim with Dust Cover

The W_23 is a Beadlock Rim with Dust Cover. It is cast as a solid piece, allowing it to be used with virtually any width tire.

Just $1.35 each plus shipping.

Item painted for display purposes; item comes bare resin

W_24

Artillery Wheel

 The W_24 is the popular Artillery Wheel that comes in the W5_9 set, but is now available all by itself.  Tire not included.  Diameter = 11/16″, depth = 1/8″.

Just $1.40 each plus shipping.

Item comes bare resin.

W_25

Stock Depth Ford Wide 5 Wheel & Hub

The W_25 is an Old School Stock Depth Ford Wide 5 Wheel and Hub.  Perfect for those Jalopy builds; also makes a great trailer rim. Overall thickness measures 5/32″.

Just $1.45 plus shipping.

Item painted for display purposes, item comes bare resin.

W_26

Deep Dish Ford Wide 5 Wheel & Hub

The W_26 is an Old School Deep Dish Ford Wide 5 Wheel and Hub.  Perfect for those Jalopy builds. Overall thickness measures 1/4″.

Just $1.50 plus shipping.

Item painted for display purposes only, item comes bare resin.

W_27

Deep Dish 5 Hole, 5 Lug, Stock Car Wheel

The W_27 is a great looking Deep Dish 5 Hole, 5 Lug, Stock Car, early Late Model, Modified, etc. type of wheel.  Measures 5/8″ diameter and is 3/8″  from backside of bead to backside of rim. Photo is of actual rim detailed with MOLOTOW pen.

Just $1.30 each plus shipping.

Item comes bare resin, tire not included.

W_28

Newer Style Wide 5 Wheel

The W_28 is an awesome Newer Style Wide 5 Wheel. Best used for competition or diorama builds where it is necessary to have rim and tire removed. NOTE: DOES NOT HAVE LUG NUTS. Great for Late Models, Modifieds, even Off Road builds. Diameter is 5/8″ (1:25 scale), Depth is 11/32″ from back of bead to backside of rim. Ron Coon Resins hubs part numbers HB_1, HB_5, HB_6, HB_7, HB_11, HB_12 will fit the W-28.  Photo is of actual item detailed with MOLOTOW pen.

Just $1.50 each plus shipping.

Item comes bare resin, tire not included.

W_29

Newer Style Wide 5 Wheel

The W_29 is an awesome Newer Style Wide 5 Wheel. NOTE: HAS LUG NUTS WITH STUDS Great for Late Models, Modifieds, even Off Road builds that the builder is leaving the rim and tire on the car. Diameter is 5/8″ (1:25 scale), Depth is 11/32″ from back of bead to backside of rim. Ron Coon Resins hubs part numbers HB_1, HB_5, HB_6, HB_7, HB_11, HB_12 will fit the W-28. Photo is of actual item detailed with MOLOTOW pen and paint.

Just $1.60 each plus shipping.

Items comes bare resin, tire not included.

W_30

Wheel Beadlock

The W_30 is a Wheel Beadlock that will fit virtually any 1:25 and 1:24 scale wheels. Great for all types of circle track builds. For optimum fit it is suggested to sand some or all of the rim bead before applying the beadlock to the wheel of choice.

Just $ .75 each plus shipping.

W_31

Old School Wheel Beadlock

The W_31 is an Old School Wheel Beadlock that will fit virtually any 1:25 and 1:24 scale wheels. Great for all types of circle track builds. For optimum fit, it is suggested to sand some or all of the rim bead before applying the beadlock to the wheel of choice. Wheel and tire not included.

Just $.75 each plus shipping.

Item is detailed for display purposes only, item comes bare resin.

W_32

Shallow Front GM Rally Wheel

The W_32 is a Shallow 1:25 Scale Front GM Rally Wheel. This is a timeless street wheel and a sought after Street Stock Wheel in the early 70s through the late 80s. Measures 3/16″ from backside of bead with some material that can be removed for narrower applications.

Just $1.45 each plus shipping.

Painted and detailed for photo purposes only. Item comes bare white resin.

W_33

Shallow Rear GM Rally Wheel

The W_33 is a Shallow 1:25 Scale Rear GM Rally Wheel. This is a timeless street wheel and a sought after Street Stock wheel in the early 70s through the late 80s. Measures 3/16″ from backside of bead with some material that can be removed for narrower applications.

Just $1.45 each plus shipping.

Painted and detailed for photo purposes only. Item comes bare white resin.

W_34

Deep Front GM Rally Wheel

The W_34 is a Deep 1:25 Scale Front GM Rally Wheel. This is a timeless street wheel and if the rules allowed and you could afford them, you were big balls in cow town if you ran a Street Stock in the early 70s through the late 80s. Measures 5/16″ from backside of bead with some material that can be removed for narrower applications.

Just $1.55 each plus shipping.

Painted and detailed for photo purposes only. Item comes bare white resin.

W_35

Deep Rear GM Rally Wheel

The W_35 is a Deep 1:25 Scale Rear GM Rally Wheel. This is a timeless street wheel and if the rules allowed, and you could afford them, you were big balls in cow town if you ran a Street Stock in the early 70s through the late 80s. Measures 5/16″ from backside of bead with some material that can be removed for narrower applications.

Just $1.55 each plus shipping.

Painted and detailed for photo purposes only. Item comes bare white resin.

W_36

1/16″ Steel Axles

The W_36 consists of eight coated steel axles. These are the same axles as we use for our W5_ series and our Quick Changes. 3″ in length and 1/16″ in diameter. Comes as a set of eight.

Just $1.20 for eight plus shipping.

W_37

5 Bolt Holman Moody Wheel

W_37 The W-37 is the classic 5 bolt Holman Moody NASCAR type wheel. Overall depth is 1/4″.

Just $1.30 plus shipping.

Tire not included. Item painted for display purposes, comes bare white resin.

W_38

Semi Deep 5 Lug Steel Wheel

The W_38 is a front, old school, semi deep, 1:25, scale 5 lug, steel type wheel. Would be great for  early Stock Cars and would make a great trailer wheel. Overall depth is 1/4″ with some extra that could be removed.

Just $1.30 plus shipping.

Detailed for display purposes only. Item  comes bare white resin. Tire and tire decal not included.,

W_39

Semi Deep 5 Lug Steel Wheel

The W_39 is a rear, old school, semi deep, 1:25, scale 5 lug, steel type wheel. Would be great for  early Stock Cars. Overall depth is 1/4″ with some extra that could be removed.

Just $1.30 plus shipping.

Detailed for display purposes only. Item  comes bare white resin. Tire and tire decal not included.

W_40

8 Lug Wheel With Heavy Duty Axle

The W_40 would make a great rim for those old late Model builds where an 8 lug wheel would be used with a heavy duty truck rear end. Overall depth = 5/16″.

Just $1.55 each plus shipping.

Tire not included, items do not come painted.

COMBO_1

The COMBO_1

COMBO_1 Save yourself some of that hard earned cash with the COMBO_1. This product group consists of 4, W_16 wheels and back halves; 4, HB_1ASA hubs, and 4, HB_2 rotors.

Just $13.55 plus shipping.

Items do not come painted.

COMBO_2

The COMBO_2

COMBO_2 Save yourself some of that hard earned cash with the COMBO_2. This package consists of 4, W_15 wheels; 4 ,HB_1RCR hubs, and 4, W_17 backing plates.

Just $11.55 plus shipping.

Tire not included, items do not come painted.

COMBO_3

The COMBO_3

COMBO_3 Save yourself some of that hard earned cash. This package consists of 4, W_15 wheels; 4, HB_1RCR hubs, and 4, W_19 backing plates.

Just $11.55 plus shipping. 

Tire not included, items do not come painted.

MP_1

Street Stock/Hobby Stock Foam Mud Plug

MP_1 If you want that Street Stock or Hobby Stock Foam Mud Plug look we have you covered! Just sand the backside until you get the bubble look you want than sand the edge until it drops in the hole.

Just $ .80 each plus shipping.

Part comes unpainted, wheel and tire not included.

W5_1

One Piece Tire Casting, 1.175″ Diameter

W5_1 These are a 1 Piece Casting with no Backside Detail. They are perfect for a shelf build with a contest look! They come as a set of 4, included are 2 metal axles and 4 mounting plates. Measurements are .573″ tread, 1.175″ diameter, and approx. .690″ sidewall to sidewall.

Just $10.65 per set plus shipping.

W5_3

Single Piece Tires, 1.162″ Diameter

W5_3 These are a 1 Piece Casting Without Backside Detail. They are perfect for a shelf build with a contest look! They come as a set of 4, included are 2 metal axles and 4 mounting plates. Measurements are .627″ tread, 1.162″ diameter, and approx. .671″ sidewall to sidewall.

Just $10.65 per set plus shipping.

Item comes unpainted.

W5_4

Single Piece Tire, 1.214″ Diameter

W5_4 These are a 1 piece casting with no backside detail. They are perfect for a shelf build with a contest look! They come as a set of 4, included are 2 metal axles and 4 mounting plates. Measurements are .658″ tread, 1.214″ diameter, and approx. .698″ sidewall to sidewall.

Just $12.00 per set plus shipping.

Items come unpainted.

W5_5

Exclusive 1.162″ Diameter Tire Design

W5_5 These are an exclusive Ron Coon Resins  1 piece casting with no backside detail using the W_1 wheel. They are perfect for a shelf build with a contest look! They come as a set of 4, included are 2 metal axles and 4 mounting plates.  Measurements are .627″ tread, 1.162″ diameter, and approx.671″ sidewall to sidewall.

Just $10.65 per set, plus shipping.

Painted to show detail, items come unpainted.

W5_6

70s – 80s Style Wide 5 Wheel & Hub

W5_6 Looking for a 70s – 80s look?  Then these are for you!  They are a 1 piece casting with Plastic Performance Products  style Wide 5 Wheel and Hub and no backside detail. They are perfect for a shelf build with a contest look! They come as a set of 4, included are 2 metal axles and 4 mounting plates.  Measurements are .489″ tread, 1.181″ diameter, and approx. .619″ sidewall to sidewall.

Just $11.20 per set plus shipping.

W5_9

Rat Rod/Jalopy Artillery Style Wheel Set

 W5_9 Looking for that Jalopy or Rat Rod look? If so the W5_9 is for you! Set includes 4 Artillery Style Wheels with molded in wide 5 hubs, 4 tires, and 4 backing plates. Tire measurements are .321″ tread, 1.143″ diameter, and approx. .371″ sidewall to sidewall.

Just $14.25  per set plus shipping.

Items do not come painted.