Resin Model Car Body Components
Our selection of 1:25 scale and 1:24 scale bodies and body parts gives you the high-quality parts that are made with the builder in mind.
RW_1
Rear Spoiler/Wing – Late Model Body
The RW_1 is a Rear Spoiler/Wing designed and 3D resin printed by WFC Motorsports exclusively for Ron Coon Resins. The RW_1 was designed to fit the WFC_3 Late Model Body but may fit other applications, check dimensions for other applications. The detail is crazy!
Overall dimensions
- width = 3 1/32”/77mm
- height = 3/8”/9.5mm
- depth = 1 1/64”/25.7mm
Just $3.99 plus shipping.
Must be prewashed with isopropyl alcohol before the painting process.
RW_2
Rear Spoiler/Wing – Street Stock, Pro Am
The RW_2 is a Rear Spoiler/Wing designed and 3D resin printed by WFC Motorsports exclusively for Ron Coon Resins. The RW_2 was designed with the Street Stock, Pro Stock, Pro Am, etc. builder in mind. The detail is crazy!
Overall dimensions:
- width = 2 33/64”/63.9mm,
- height = 25/64”/9.9mm
- depth = 61/64”/24.2mm.
Just $3.99 plus shipping.
Must be prewashed with isopropyl alcohol before the painting process.
HS_1
Street / Strip Hood Scoop
What a great hood scoop for a street muscle car or strip gasser. Designed by Nahuel Gomez and 3D resin printed by Ron Coon Resins. Dimensions are Length = 35.5mm, Width = 26mm, and Height = 8.6mm.
Just $2.50 plus shipping.
HS_2
Street / Strip Hood Scoop
The HS_2 is a classic hood scoop design that screams Nostalgic Pro Stock! 3D resin printed by Ron Coon Resins. Dimensions are Length = 38.5mm, Width = 23.4mm, and Height = 9.5mm.
Just $2.50 plus shipping.
RVT_1
RIVETS
Finally an answer to doing rivets! Designed and 3d Resin printed by Ron Coon Resins. 1:25 / 1:24 scale. These were designed to replicate rivets used in race car body fabrication, even have the dimple left after installation. They come as a set of 100 rivets. It is recommended to cut off plate with fresh Exacto or razor blade. Drill hole with micro drill bit and drop rivet stem into hole. Not for beginners!
Just $3.00 per set plus shipping.
RW_2
New Item Coming Soon
The RW_2 is a Rear Spoiler/Wing designed and 3D resin printed by WFC Motorsports exclusively for Ron Coon Resins. The RW_2 was designed with the Street Stock, Pro Stock, Pro Am, etc. builder in mind. The detail is crazy!
Just $3.99 plus shipping.
Must be prewashed with isopropyl alcohol before the painting process.
AP_1
Access Panels
The AP _1 is an awesome detail part for any Circle Track or Drag build. This panel would be used to access small hard to get to areas. Designed and 3D resin printed by Ron Coon Resins. Full of detail and super thin to be in 1:25 / 1:24 scale. Dimensions are 8mm x 8mm. Items ship on supports.
Just $1.50 per pair plus shipping.
AP_2
Access Panels
The AP _2 is an awesome detail part for any Circle Track or Drag build. This panel would be used to access the fuel cell to fuel the car. Designed and 3D resin printed by Ron Coon Resins. Full of detail and super thin to be in 1:25 / 1:24 scale. Dimensions are 10mm x 10mm. Items ship on supports.
Just $1.50 per pair plus shipping.
AP_3
Access Panels
The AP _3 is an awesome detail part for any Circle Track or Drag build. This panel would be used to access master cylinders and brake / clutch pedals. Designed and 3D resin printed by Ron Coon Resins. Full of detail and super thin to be in 1:25 / 1:24 scale. Dimensions are 8mm x 16mm. Items ship on supports.
Just $1.55 per pair plus shipping.
HS_L88
Hood Scoop
HS_L88 Possibly the most recognized hood scoop of all times, the L88. 1:25 scale
Just $2.10 each plus shipping.
HS_AD
Air Cleaner Air Deflector
The HS_AD is an Air Cleaner Air Deflector as seen at any local weekend short track. This air deflector was developed with enough “wiggle” room built in, making it applicable for many different applications.
Dimensions:
- width at rear 1 5/16″
- width at front 3/4″
- length front to rear 1 1/4″
Just $1.86 each plus shipping.
Price is for deflector only. air cleaner, cars, etc. not included.
HS_AD2
Air Cleaner Air Deflector
The HS_AD2 is an amazing new style deflector seen at any local weekend short track. Designed by Dwight Carter at Custom Dirt Cars and 3D resin printed by Jim Hargraves at Jim’s Outlaws for Ron Coon Resins.
Dimensions:
- width at rear 19.16mm
- width at front 9.47mm″
- length front to rear 17mm
Just $2.25 each plus shipping.
Multiple items shown for display purposes. Price is per item.
HS_AD3
Air Cleaner Air Deflector
The HS_AD3 is an amazing new Renegade style deflector seen at any local weekend short track. Designed and 3D resin printed by Jim Hargraves at Jim’s Outlaws for Ron Coon Resins.
Dimensions:
- width at rear 21.4mm
- width at front 9.5mm
- length front to rear 20.3mm
Just $2.25 each plus shipping.
Multiple items shown for display purposes. Price is per item.
HS_AD4
Air Cleaner Air Deflector
If you have a Mod, Late Model, or Street Stock build the HS_AD4 is for you. Designed by Nahuel Gomez, manipulated and 3D resin printed by Ron Coon Resins. Overall dimensions are Height = 5mm, Width = 19mm, and Depth = 16.7mm.
Just $1.75 per each plus shipping.
HS_AD5
Air Cleaner Air Deflector
If you’re building a 1:25/1:24 scale Stock Car, Modified, or Late Model the HS_AD5 is for you. Designed and 3D resin printed by Ron Coon Resins. The HS_AD5 overall dimensions are as follows; Height = 5.76mm, Width = 27.4mm, and Length = 13mm.
Just $1.75 each plus shipping.
HS_AD6
Air Cleaner Air Deflector
The HS_AD6 is a modified Renegade style deflector seen at any local weekend short track. 3D resin printed by Ron Coon Resins. Note, this is similar in design to the HS_AD3 but are not the same as per the dimensions show.
Dimensions:
- width at rear 30.0mm
- width at front 16.0mm
- length front to rear 22.0mm
Just $1.75 each plus shipping.
HS_AD7
Air Cleaner Air Deflector
If you have a Mod, Late Model, or Street Stock build the HS_AD7 is for you. 3D resin printed by Ron Coon Resins. Overall dimensions are Height = 5mm, Width = 25.6mm, and Length = 20.0mm.
Just $1.75 per each plus shipping.
RW_2
New Item Coming Soon
The RW_2 is a Rear Spoiler/Wing designed and 3D resin printed by WFC Motorsports exclusively for Ron Coon Resins. The RW_2 was designed with the Street Stock, Pro Stock, Pro Am, etc. builder in mind. The detail is crazy!
Just $3.99 plus shipping.
Must be prewashed with isopropyl alcohol before the painting process.
ADAC_COMBO1
Air Deflector & Air Cleaner Combo
The ADAC_COMBO1 is a one HS_AD4 and one AC_10 money savings combo! Would look great on any 1:25 / 1:24 scale Late Model, Modified, or Street Stock build. Designed and 3D printed by Ron Coon Resins.
Just $3.25 plus shipping.
ADAC_COMBO2
Air Deflector & Air Cleaner Combo
The ADAC_COMBO2 is a one HS_AD4 and one AC_11 money savings combo! Would look great on any 1:25 / 1:24 scale Late Model, Modified, or Street Stock build. Designed and 3D printed by Ron Coon Resins.
Just $3.25 plus shipping.
ADAC_COMBO3
Air Deflector & Air Cleaner Combo
The ADAC_COMBO3 is a one HS_AD4 and one AC_12 money savings combo! Would look great on any 1:25 / 1:24 scale Late Model, Modified, or Street Stock build. Designed and 3D printed by Ron Coon Resins.
Just $3.25 plus shipping.
ADAC_COMBO4
Air Deflector & Air Cleaner Combo
The ADAC_COMBO4 is a one HS_AD5 and one AC_10 money savings combo! Would look great on any 1:25 / 1:24 scale Late Model, Modified, or Street Stock build. Designed and 3D printed by Ron Coon Resins.
Just $3.25 plus shipping.
ADAC_COMBO5
Air Deflector & Air Cleaner Combo
The ADAC_COMBO5 is a one HS_AD5 and one AC_11 money savings combo! Would look great on any 1:25 / 1:24 scale Late Model, Modified, or Street Stock build. Designed and 3D printed by Ron Coon Resins.
Just $3.25 plus shipping.
ADAC_COMBO6
Air Deflector & Air Cleaner Combo
The ADAC_COMBO6 is a one HS_AD5 and one AC_12 money savings combo! Would look great on any 1:25 / 1:24 scale Late Model, Modified, or Street Stock build. Designed and 3D printed by Ron Coon Resins.
Just $3.25 plus shipping.
HDR_2
Exhaust Heat Shield
The HDR_2 exhaust heat shield is must add detail for any circle track builder wanting exhaust to exit through body panel. Designed and 3D resin printed by Ron Coon Resins. Measures 9.8mm x 6.5mm. Drill panel hole to 11/64″ to allow shield to fit flush with the panel.
Just $.75 per pair plus shipping.
HDR_5
Exhaust Heat Shield
The HDR_5 exhaust heat shield is must add detail for any circle track builder wanting dual exhaust to exit through body panel. Designed and 3D resin printed by Ron Coon Resins. Measures 16mm x 8mm. Drill panel hole to 11/64″ to allow shield to fit flush with the panel. Part number is for 1 shield.
Just $.75 plus shipping.
HDR_6
Exhaust Heat Shield
The HDR_6 exhaust heat shield is must add detail for any circle track builder wanting dual exhaust to exit through body panel. Designed and 3D resin printed by Ron Coon Resins. Measures 14mm x 7.5mm. Drill panel hole to 11/64″ to allow shield to fit flush with the panel. Part number is for 1 shield.
Just $.75 plus shipping.
WFC_FPC1
Roll Cage
Tired of building roll cages, wish there was an easier way, if so the WFC_FPC1 is for you! Designed and 3D resin printed by WFC Motorsports, this one piece cage will take your build to the next level. Overall dimensions are length = 47.8mm, width = 56.5mm, and height = 37.5mm. Item part number is for 1 roll cage.
Just $7.50 per cage plus shipping.
WFC_FPC2
Roll Cage
Tired of building roll cages, wish there was an easier way, if so the WFC_FPC2 is for you! Designed and 3D resin printed by WFC Motorsports, this one piece cage will take your build to the next level. Overall dimensions are length = 47.8mm, width = 61.8mm, and height = 37.5mm. Item part number is for 1 roll cage.
Just $7.50 per cage plus shipping.
CT_1 & CT_2
CAGE TOPPERS
Designed and 3D resin printed by WFC Motorsports exclusively for Ron Coon Resins, the CT_1 and CT_2 cage toppers make building race cars with decking a breeze. The CT_1 was designed to work with the WFC_3 Late Model body but would work great with other full roof applications. The CT_2 was designed to work with the WFC_12 Wedge Late Model but would work great with most partial roof builds. Check the dimensions before ordering to calculate if the cage toppers will work for your specific application. CT_1 overall dimensions are as follows; 2 1/2 wide, 1 1/2″ long, and 1/2″ tall. CT_2 overall dimensions are as follows; 2″ wide. 1 5/8″ long, and 3/8″ tall.
Just $5.99 each plus shipping.
Item comes bare resin.
WFC_1
Camaro with Flat Hood
WFC Motorsports 1:25 scale Vacuform Camaro with Flat Hood. Made from .040″ styrene.
$11.50 each plus shipping.
WFC_2
Camaro with Hood Scoop
WFC Motorsports 1:25 scale Vacuform Camaro with Hood Scoop. Made from .040″ styrene. Body comes as bare styrene.
$11.50 each plus shipping.
WFC_3
Dirt Late Model
WFC Motorsports 1:24 scale Vacuform Dirt Late Model. Unpainted Body and roof with molded in deck only, other accessories not included. Made from .040″ styrene.
$11.50 each plus shipping.
WFC_4
80s Monte Carlo Stock Car Without Glass Canopy Insert
WFC_4 Vacuform 80s Monte Carlo Stock Car from WFC Motorsports. 1:24 scale Made from .040″ styrene.
$11.50 each plus shipping.
WFC_4G
Monte Carlo Stock Car With Glass Canopy Insert
WFC Motorsports 1:24 scale vacuform 80s Monte Carlo Stock Car With Glass. Comes with clear styrene glass canopy insert. Body made from .040″ styrene.
$14.50 each plus shipping.
WFC_5
Camaro with Bubble Front Fenders and Hood Scoop
WFC_5 Vacuform Camaro with Bubble Front Fenders and Hood Scoop from WFC Motorsports. 1:25 scale. Made from .040″ styrene.
Body comes bare styrene, wheels and tires not included.
$11.50 each plus shipping.
WFC_6
IMCA/WISSOTA Modified
WFC_6 WFC Motorsports 1:24 scale vacuform IMCA/WISSOTA Modified. Bodies come as bare .040″ ; wheels and tires not included.
$11.50 each plus shipping.
WFC_7
Hobby Stock/Street Stock/Pro Am Camaro
WFC_7 WFC Motorsports 1:25 scale vacuform Hobby Stock/Street Stock/Pro Am Camaro. Bodies come as bare .040″ styrene ; wheels and tires not included.
$11.50 each plus shipping.
WFC_8
IROC Camaro
WFC_8 IROC Camaro from WFC Motorsports, 1:25 scale vacuform . Bodies come as bare .040″ styrene;wheels and tires not included.
$11.50 each plus shipping.
WFC_9
Ford Thunderbird Without Glass Canopy Insert
WFC_9 WFC Motorsports vacuform 1:25 scale Ford Thunderbird. Bodies come as bare .040″ styrene.
DOES NOT COME WITH GLASS CANOPY INSERT.
$11.50 each plus shipping.
WFC_9G
Ford Thunderbird With Glass Canopy
WFC_9G WFC Motorsports vacuform 1:25 scale Ford Thunderbird. Bodies come as bare .040″ styrene; wheels and tires not included.
COMES WITH GLASS CANOPY INSERT.
$14.50 each plus shipping.
WFC_10
Monte Carlo SS Slope Nose
WFC_10 WFC Motorsports vacuform 1:24 scale sloped nose Metric Monte Carlo SS. Bodies come as bare .040″ styrene; wheels and tires not included.
$11.50 each plus shipping.
WFC_11
Late Model Body Without Glass Canopy Insert
WFC_11 WFC Motorsports 1:25 scale vacuform styrene Late Model Body. Made from .040″ styrene. Hood and trunk lines have been intentionally omitted to allow builder to cut them in any shape and size for their specific needs. Body comes as bare styrene and will need to be trimmed.
$11.50 each plus shipping.
NOTE: DOES NOT COME WITH CLEAR STYRENE GLASS CANOPY.
WFC_11G
Late Model Body With Glass Canopy Insert
WFC_11G WFC Motorsports 1:25 scale vacuform styrene Late Model Body. Made from .040″ styrene. Hood and trunk lines have been intentionally omitted to allow builder to cut them in any shape and size for their specific needs. Body comea as bare styrene and will need to be trimmed.
COMES WITH CLEAR STYRENE GLASS CANOPY INSERT.
$14.50 each plus shipping.
WFC_12
80’s Wedge Late Model
WFC_12 Builders have been begging for an 80s Wedge Late Model for years and WFC Motorsports has knocked it out of the park with the vacuform styrene WFC_12. To make it even better the side panels have been left blank intentionally to allow for both 1:25 and 1:24 builds. Body comes as bare styrene and will need to be trimmed. Wheels and tires not included.
$11.50 each plus shipping.
SSS_1
NDRA Style Camaro
Designed by Spangle’s Speedway Specials and vacuformed by WFC Motorsports exclusively for Ron Coon Resins. This bubble fender NDRA style Late Model speaks for its self! Designed to fit AMT NASCAR kit wheelbase.
Part number is for bare white styrene plastic body only. Wheel and glass openings must be trimmed out by builder.
Just $12.50 each plus shipping.
Item comes bare white styrene plastic..
SSS_2
70’S Barracuda
Designed by Spangle’s Speedway Specials and vacuformed by WFC Motorsports exclusively! Lance Spangle did an excellent job on this MOPAR. Designed to fit AMT NASCAR kit wheelbase.
Part number is for bare white styrene plastic body only. Wheel and glass openings must be trimmed out by builder.
Just $12.50 each plus shipping.
Item comes bare white styrene plastic..
RCR_1
Altered Drag Body
Doesn’t get much cooler than Altered Dragsters. 1:25 scale Altered Dragster body 3D resin printed by Ron Coon Resins. Overall dimensions are Height = 42mm, Length = 69.3mm and Width = 54mm.
Just $14.00 each plus shipping.
Part number is for 1 body.
RCR_2
Predator Late Model Nose
The RCR_2 Predator style Dirt Late Model nose is a must for all of you scratch Dirt Late Model builders! This 1:25 scale nose is a 3DTech design 3D resin printed by Ron Coon Resins. Just like the big boys are running with the lower valance shaved off to compensate for chassis roll onto the right front.
Just $11.99 each plus shipping.
SSS_2
70’S Barracuda
Designed by Spangle’s Speedway Specials and vacuformed by WFC Motorsports exclusively! Lance Spangle did an excellent job on this MOPAR. Designed to fit AMT NASCAR kit wheelbase.
Part number is for bare white styrene plastic body only. Wheel and glass openings must be trimmed out by builder.
Just $12.50 each plus shipping.
Item comes bare white styrene plastic..
CT_1 & CT_2
CAGE TOPPERS
Designed and 3D resin printed by WFC Motorsports exclusively for Ron Coon Resins, the CT_1 and CT_2 cage toppers make building race cars with decking a breeze. The CT_1 was designed to work with the WFC_3 Late Model body but would work great with other full roof applications. The CT_2 was designed to work with the WFC_12 Wedge Late Model but would work great with most partial roof builds. Check the dimensions before ordering to calculate if the cage toppers will work for your specific application. CT_1 overall dimensions are as follows; 2 1/2 wide, 1 1/2″ long, and 1/2″ tall. CT_2 overall dimensions are as follows; 2″ wide. 1 5/8″ long, and 3/8″ tall.
Just $5.99 each plus shipping.
Item comes bare resin.