FE_1

Basic Fire Extinguisher for Circle Track, Drag & Road Course Cars

FE_1 Don’t feel the burn! The FE_1 is a Basic Fire Extinguisher found in circle track, drag, and road course race cars.

Just $.75 each plus shipping.

Item painted for display purposes, item comes bare resin.

FE_2

Fire Extinguisher With Gauge And Activating Head

FE_2 The FE_2 is a fire extinguisher with gauge and manual pull style activating head.  Scaled loosely around Lucas Late Model Series fire suppression bottles. Cylinder diameter is 5.25mm and overall height is 16.2mm. Designed and 3D resin printed by Ron Coon Resins. Price is for one bottle per part number.

Just $1.50 plus shipping. 

FE_3

Fire Extinguisher With Round Tubing Mounting Brackets

FE_3  Now how cool is this! The FE_3 consists of one FE_2 extinguisher and two mounting rings with round tubing clamps. One side of clamps are part of the rings while the other half of clamps are separate. Rings even have bolt and nut  at the compression end. Fits .080mm round tubing/rod. Designed and 3D resin printed by Ron Coon Resins.

Just $3.25 per assembly plus shipping.

Tubing/rod not included.

SW_2

Old School Steering Wheel

SW_2 Good ol’ fashioned get up on the wheel and drive it Steering Wheel!!! Diameter = 3/4″.

Just $1.75 plus shipping. 

Detailed for photo purposes only, item comes bare resin.

SW_4

Paw Saver Steering Wheel

SW_4  The SW_4 is a “Paw Saver” style Steering Wheel that was used in many Circle Track race cars  from coast to coast in the 80s. Assembly consists of steering wheel, steering wheel coupler, and steering shaft.

• Diameter = 43/64″
• Depth with coupler = 11/32″,
• Steering shaft = 1/16″diameter
• Length = 1 1/32″

Just $2.99 plus shipping. 

Item painted for display purposes, item comes bare resin.

SW_5

3 Spoke Steering Wheel With Disconnect Hub

SW_5 Three spoke steering wheel with disconnect hub. Designed and 3D printed by Jim’s Outlaws for Ron Coon Resins. Dimensions are Diameter = 15mm, Overall Depth = 5.8mm.

Part number is for 1 steering wheel and 1 disconnect hub.

Just $2.55 each plus shipping.

SW_9

Steering Wheel With Pad

SW_9 is a great steering wheel for a Sprint, Modified, Street Stock, etc. build. Diameter = 15mm and has indent if drilling is required. Designed and 3D resin printed by Ron Coon Resins.

Part number is for 1 steering wheel.

Just $1.75 per steering wheel plus shipping. 

SW_10

Flat Spoke Steering Wheel

The SW_10 is a flat spoke steering wheel with disconnect hub that is a must for detailed Circle Track, Strip, or Street builds! Designed by Black Box STL, modified and 3D resin printed by Ron Coon Resins. Overall dimensions are Diameter = 14.8mm, Depth = 5mm.

Part number is for 1 steering wheel.

Just $2.55 each plus shipping.

SW_11

Flat Spoke Steering Wheel

The SW_11 is a flat spoke steering wheel with disconnect hub that is a must for detailed Circle Track, Strip, or Street builds! Designed and 3D resin printed by Ron Coon Resins. Overall dimensions are Diameter = 14.8mm, Depth = 4.5mm.

Part number is for 1 steering wheel.

Just $2.55 each plus shipping.

SW_13

Ultra Light Weight Steering Wheel

The SW_13 3 spoke ultra light weight steering with disconnect hub is a must for detailed Circle Track, Strip, or Street builds! Designed by Nahuel Gomez and 3D resin printed by Ron Coon Resins. Overall dimensions are Diameter = 15.5mm, Depth = 4.75mm.

Price is for 1 steering wheel.

Just $2.55 each plus shipping.

SW_14

3 Spoke Steering Wheel

The SW_14 is a great all around flat spoke Longacre style steering wheel and steering wheel hub. Would be a great addition to any Sprint Car, Street Stock, Modified, Drag, Street, or Hot Rod build. 1:25 / 1:24 scale. Designed and 3D resin printed by Ron Coon Resins

Just $2.55 each plus shipping.

DC_R1

In Car Radio & Box

Set your build apart from the others with this in car radio set up! Designed and printed by Ron Coon Resins. Radio installed in box overall dimensions are Height = 16.9mm, Width = 4.77mm, and Depth = 4.4mm. 1:25/1:24 scale.

Part number is for one radio and one box.

Just $1.55 per set  plus shipping.

SW_6

Modified / Sprint Center Steering Box

The SW_6 center steering box is a must for anyone building a NE Modified, Vintage Super Dirt Modified, or Sprint Car! Designed and 3D resin printed by  Ron Coon Resins. Item measures 35mm wide, 22mm deep, mounting tube diameter is 2.8mm in diameter, and steering wheel shaft is 2mm in diameter.

Steering box pitman arm is located in the Miscellaneous Parts section, part number SW_7.

Just $2.99 each plus shipping.

Item comes on supports that must be removed by builder.

RT_1

Center Console With Aluminum Cans

The RT_1 is an excellent center console for 1:25 / 1:24 scale Rat Rod, Hot Rod, Street Jalopy, etc. builds. Check out the cool detail of the crown can holders! Designed and 3D resin printed by Ron Coon Resins. It is recommended to not paint the tops of the cans but apply a light black wash instead. Cans are the same as our DRA_2 cans. Part number includes 1 console and 2 cans. Overall dimensions with cans installed are height = 12.9mm, length = 12.85mm, and width = 7.7mm.

Just $1.99 per set plus shipping.

D_1

Dash for Sprint Car or Super Modified

D_1 Building an old Sprint Car or Super Modified?  If so you gotta have one of these Dashes!

Just $1.50  plus shipping.

D_2

Dashboard for East Coast Modified, Jalopy, Stock Cars

D_2 Building an old East Coast Modified?    If so, you gotta have one of these dashes! Also work great in Jalopies and Stock Cars.

Just $1.50 each plus shipping.

H_1

Full Faced Helmet With Air Intake

H_1 These cool looking Full Faced Helmets with air intake would look great sitting in any build.

Just $1.25 each plus shipping.

H_3

Simpson Shark Type Helmet With Driver’s Face

H_3  Simpson Shark Type Helmet with Driver’s Face. Don’t want the face? Just take your Exacto on end, scrape it off and paint the opening flat black just like the example, or for a creepy presentation, detail the face and place it in a diorama or in your car.

Just $1.25 each plus shipping.

Item painted and weathered for display purposes only. Item comes bare resin.

DC_GP1

Go Pro Cameras

Now these are cool! Be the first on your block to install Go Pro cameras on your race car build. 1:25 / 1:24 scale. Designed and 3D resin printed by Ron Coon Resins. Overall dimensions are Width = 5.5mm, Height = 5.0mm, and Depth = 2.75mm

Just $$.99 per pair plus shipping.

H_5

Helmet Air Blower / Pump

H_5 Found in almost all circle track cars today. Made to supply fresh air to the driver via flex hose to an air supply helmet such as our H_1 helmet.

Just $1.99 each plus shipping.

H_6

Race Car Driver Bust

The H_6 is for slot car and shelf builders looking for that old school open faced helmet look. Designed to replicate driver with bandana or the face mask of the era.  Custom made by Ron Coon Resins. May require minor trimming.

Just $3.99 per bust plus shipping.

S_1

Single Wrap Circle Track Seat

S_1 Single wrap around circle track seat.

Just $2.16 each plus shipping.

S_2

Double Wrap Around Driver’s Seat

S_2 Double Wrap Around Circle Track, road race, or drag race driver’s seat.

Just $2.16 each plus shipping.

S_3

Old School Single Low Back Circle Track Seat

The S_3 is an Old School Single Wrap Around Low Back Circle Track Seat.

Just $2.16 each plus shipping.

S_4

Early Years Driver’s Seat

The S_4 is a good all around Early Years Seat when men were men.

Just $2.16 each plus shipping. 

Painted and weathered for photo purposes, item comes bare resin.

S_5

Old School, Low Back, Single Wrap Race Seat

The S_5 is a an Old School, Low Back, Single Wrap Around race seat! Just $2.16 plus shipping.

Just $2.16 each plus shipping.

Item detailed for display purposes only, comes bare resin.

S_6 

Driver’s Seat for Circle Track, Drag, Road Race or Street

The S_6 is a good all around Driver’s Seat whether it be for circle track, drag, road race, or street builds.

Just $2.16 each plus shipping.

Item detailed for display purposes only, comes bare resin.

S_7

Old School Bucket Seat

The S_7 is a cool Old School Bucket Seat. Would look great in a Jalopy or Rat Rod build.

Just $2.16 each plus shipping. 

Item detailed for display purposes only, item comes bare resin.

S_8

Kirkey Full Containment Race Seat

The S_8 is a Jim’s Outlaws Kirkey full containment race seat designed and 3D printed for Ron Coon Resins. The detail of this seat will blow you away from the lightening holes to the seat padding. Overall dimensions are Height = 37.5mm, Width = 20mm, and Depth = 16.5mm.

Just $14.94 each plus shipping.

Part number and price are for 1 seat. Multiple items shown for display. 

S_9

Ultra Shield Full Containment Race Seat

The S_9 is a Jim’s Outlaws Ultra Shield full containment race seat designed and 3D printed for Ron Coon Resins. The detail of this seat will blow you away from the lightening holes to the seat padding. Overall dimensions are Height = 37.3mm, Width = 18.7mm, and Depth = 18.5mm.

Just $14.94 each plus shipping.

Part number and price are for 1 seat. Multiple items shown for display. 

S_10

Butlerbuilt Full Containment Race Seat

The S_10 is a Jim’s Outlaws Butlerbuilt full containment race seat designed and 3D printed for Ron Coon Resins. The detail of this seat will blow you away from the lightening holes to the seat padding. Overall dimensions are Height = 38.4mm, Width = 23mm, and Depth = 22mm.

Just $14.94 each plus shipping.

Part number and price are for 1 seat. Multiple items shown for display.

S_11

Kirkey Race Seat

The S_11 is a WFC Motorsports designed and 3D resin printed Kirkey race seat. The S_11 would be a great addition to any circle track build! Overall dimensions are Height = 30mm, Width = 18.3mm, and Depth = 16.5mm.

Just $3.75 each plus shipping.

S_12

Economy Containment Seat

The S_12 is a layback containment seat with the builder on a budget in mind! 3D resin printed by Ron Coon Resins. Overall dimensions are Height = 38mm, 23mm, and Depth = 16mm.

Just $2.55 each plus shipping plus shipping.

S_13

Kirkey Micro/Mini Sprint/Jr Dragster Seat

Need a seat for a 1:25 scale early micro/mini Sprint build or a Jr Dragster build, if so Ron Coon Resins has the seat for you. Designed by Nahuel Customs and 3D resin printed Ron Coon Resins. Dimensions are Height = 30mm, Width = 16mm, Depth = 19mm.

Price is for 1 seat.

Just $2.50 each plus shipping plus shipping.

S_14 

Kirkey Full Size Race Seat

The S_14 is a 1:25 adult size Kirkey 20 series seat. This would be an entry level seat for vintage circle track and drag racing builds. Designed by Nahuel Customs and sized and 3D resin printed by Ron Coon Resins. Dimensions are Height = 33.3mm, Width = 18.5mm, Depth = 22.0mm.

Price is for 1 seat.

Just $3.75 each plus shipping plus shipping.

S_15 

Kirkey Light Weight Race Seat

The S_15 is a 1:25 Kirkey 20 degree lay back light weight seat. This would make a great Street Stock, Modified, Late Model seat. Designed by Nahuel Customs and sized and 3D resin printed by Ron Coon Resins. Overall dimensions are Height = 35.0mm, Width = 18.8mm, Depth = 17.0.0mm.

Price is for 1 seat.

Just $3.75 each plus shipping plus shipping.

S_16

Nostalgic Bomber Seat

The S_16 is a low back 1:25 scale bomber style seat. An awesome vintage style bomber seat for those vintage Circle Track and Drag type builds as well as Rat Rod builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 24.5mm, Width = 17.7mm, and Depth = 18.5mm

Just $2.50 each plus shipping!!!

S_17

Nostalgic Bomber Seat

The S_17 is a high back 1:25 scale bomber style seat. An awesome vintage style bomber seat for those vintage Circle Track and Drag type builds as well as Rat Rod builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 31.5mm, Width = 18mm, and Depth = 20.0mm

Just $2.50 each plus shipping!!!

S_18

Economy Race Seat

The S_18 is a high back 1:25 scale entry level style race seat. An awesome vintage style seat for those vintage Circle Track and Drag type builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 34mm, Width = 17.9mm, and Depth = 22.0mm

Just $2.16 each plus shipping!!!

S_19

Nostalgic Bomber Seat

The S_19 is a low back 1:25 scale bomber style seat. An awesome vintage style bomber seat for those vintage Circle Track and Drag type builds as well as Rat Rod builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 22.7mm, Width = 17.46mm, and Depth = 20.8mm

Just $2.50 each plus shipping!!!

S_20

Nostalgic Bomber Seat

The S_20 is a low back 1:25 scale bomber style seat. An awesome vintage style bomber seat for those vintage Circle Track and Drag type builds as well as Rat Rod builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 17mm, Width = 17.0mm, and Depth = 16.0mm

Just $2.16 each plus shipping!!!

S_21

Nostalgic Bomber Seat

The S_21 is a low back 1:25 scale bomber style seat. An awesome vintage style bomber seat for those vintage Circle Track and Drag type builds as well as Rat Rod builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 23.5mm, Width = 17..6mm, and Depth = 21.8mm

Just $2.50 each plus shipping!!!

S_22

Nostalgic Bomber Seat

The S_22 is a low back 1:25 scale bomber style seat. An awesome vintage style bomber seat for those vintage Circle Track and Drag type builds as well as Rat Rod builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 23.0mm, Width = 17.3mm, and Depth = 22.0mm

Just $2.50 each plus shipping!!!

S_23

Circle Track Containment Seat

The S_23 is a 1:25 / 1:24 scale circle track containment seat. Great for Late Model, Modified, Street Stock, Hobby Stock, and Sprint builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 32.0mm, Width = 22mm, and Depth = 22.5mm. Part number includes 1 seat and 1 headrest / brackets.

Just $3.95 each plus shipping!!!

Part come bare resin, painted for display purposes only.

S_24

Circle Track Containment Seat

The S_24 is a 1:25 / 1:24 scale circle track containment seat. Great for Late Model, Modified, Street Stock, Hobby Stock, and Sprint builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 32.0mm, Width = 22mm, and Depth = 22.5mm. Part number includes 1 seat, 1 economy seat pad, and 1 headrest / brackets.

Just $4.25 each plus shipping!!!

Part come bare resin, painted for display purposes only.

S_25

Circle Track Containment Seat

The S_25 is a 1:25 / 1:24 scale circle track containment seat. Great for Late Model, Modified, Street Stock, Hobby Stock, and Sprint builds!  3D resin printed by Ron Coon Resins. Overall dimensions are Height = 32.0mm, Width = 22mm, and Depth = 22.5mm. Part number includes 1 seat, 1 deluxe seat pad, and 1 headrest / brackets.

Just $4.35 each plus shipping!!!

Part come bare resin, painted for display purposes only.

TP_1 

New Item Coming Soon

TP_1 Oh yeah!!! It’s Old School Foot Shaped Throttle Pedal time!

Just $.65 each plus shipping plus shipping.

Item comes bare resin.

S_27

Low Back Bucket Seat

What a classic low back seat! The S_27 would look great in every build from Nostalgic Sprint car to Hot Rod. 1:25 / 1:24 scale. 3D resin printed by Ron Coon Resins. Overal dimensions are Height = 25mm, Width = 19.9mm, and Depth = 21mm.

Just $2.50 each plus shipping.

TP_1 

New Item Coming Soon

TP_1 Oh yeah!!! It’s Old School Foot Shaped Throttle Pedal time!

Just $.65 each plus shipping plus shipping.

Item comes bare resin.

TP_1 

Foot Shaped Throttle Pedal

TP_1 Oh yeah!!! It’s Old School Foot Shaped Throttle Pedal time!

Just $.65 each plus shipping plus shipping.

Item comes bare resin.

TP_2

Mr. Gasket  Throttle & Dimmer Switch Pedals

Here’s a trip down nostalgic lane! These Mr. Gasket style throttle and dimmer switch pedals were hanging on the wall of every speed shop and parts house in the day. 1:25 / 1:24 scale. 3D resin printed by Ron Coon Resins.

Just $.75 per set plus shipping.

Black washed for photo purposes. Item comes bare resin.

MC_4

Old School Hand Clutch / Brake

MC_4 The MC_4 is a cool Old School Hand clutch set up like you would find in vintage Mods and Super Mods. The MC_4 could also be used as a hand brake set up like you would find in vintage open wheel cars and dragsters. CAD designed and resin 3D printed by Ron Coon Resins.

Just $1.50 each plus shipping!!!

SWT_1

Electrical Switches

Take your build to a whole new level of detail with these electrical switch panels in the on position. 3D resin printed by Ron Coon Resins. Overall dimensions are Length = 11.9mm, Height = 5.25mm, and Depth = 2.28mm. 1:25 / 1:24 scale.

Just $1.60 per pair plus shipping.

SWT_2

Electrical Switches

Take your build to a whole new level of detail with these electrical switch panels in the off position. 3D resin printed by Ron Coon Resins. Overall dimensions are Length = 11.9mm, Height = 5.25mm, and Depth = 3.8mm. 1:25 / 1:24 scale.

Just $1.60 per pair plus shipping.

SH_1

Old School Gear Shifter

The SH_1 is a good ol’ school Shifter. Can be used as a 4 speed, three speed, or automatic gear shifter.

Just $.75  each plus shipping.

Detailed for display purposes, item comes bare resin. Shifter only.

SH_2

Circle Track 3  Speed Manual Transmission Shifter

The SH_2 is a Circle Track 3  Speed Manual Transmission Shifter designed and 3D resin printed by WFC Motorsports. So detailed that the shifter levers have three holes per lever, mounting plate with bolt heads, and a recessed area that the shifters go down into. This is a must have item for those building more recent Street Stocks, Hobby Stocks, Modifieds, etc.

Just $1.50 each plus shipping.

Item detailed for display purposes only, currently comes bare gray resin. It is recommended that item be lightly cleaned with isopropyl alcohol. A very light coat of primer prior to paint is recommended if a solvent based wash is to be used.

SH_3

Circle Track Automatic Transmission Shifter

The SH_3 is a TCI style Circle Track Automatic Transmission Shifter designed and 3D resin printed by Ron Coon Resins. This is a must have item for those building more recent Street Stock, Hobby Stock, and B Mod builds. Great addition to those using our TR_PG Powerglide transmissions.

Just $1.25 each plus shipping.

Item comes bare  resin.

SH_4

Rat Rod / Street Rod Shifter

Designed and 3D resin printed by Ron Coon Resins, the SH_4 is a must for Rat Rod and Street Rod builders who want to separate themselves from the crowd! Overall dimensions are  Height = 14.5mm, Length = 9.2mm, and Width = 7.9mm. 1:25 / 1:24 scale.

Just $1.25 each plus shipping.

Item comes bare gray resin.

SH_5

Rat Rod / Street Rod Shifter

Designed and 3D resin printed by Ron Coon Resins, the SH_5 is a must for Rat Rod and Street Rod builders who want to separate themselves from the crowd! Overall dimensions are  Height = 18.8mm, Length = 9.2mm, and Width = 7.9mm. 1:25 / 1:24 scale.

Just $1.25 each plus shipping.

Item comes bare gray resin.

SH_6

Rat Rod / Street Rod Shifter

Designed and 3D resin printed by Ron Coon Resins, the SH_6 is a must for Rat Rod and Street Rod builders who want to separate themselves from the crowd! Overall dimensions are  Height = 26.0mm, Length = 9.2mm, and Width = 7.9mm. 1:25 / 1:24 scale.

Just $1.25 each plus shipping.

Item comes bare gray resin.

SH_7

Rat Rod / Street Rod Shifters

Rat Rod / Street Rod variety pack that consists of one SH_4, SH_5, and SH_6 at a discounted price! Designed and 3D resin printed by Ron Coon Resins, the SH_7 is a must for Rat Rod and Street Rod builders who want to separate themselves from the crowd!

Just $3.00 per set plus shipping.

Item comes bare gray resin.

SH_8

Nostalgic Brass Knuckle Shifter

What great 3D resin printed shifter for a 1:25 / 1:24 scale Muscle Car, Street Rod, or Rat Rod build! Height = 14.5mm.

Black washed for photo purposes, item comes gray resin.

Just $1.25 each plus shipping.

SH_9

Nostalgic Pistol Grip Shifter

What great 3D resin printed shifter for a 1:25 / 1:24 scale Muscle Car, Street Rod, or Rat Rod build! Height = 14.0mm.

Black washed for photo purposes, item comes gray resin.

Just $1.25 each plus shipping.

SH_10

Nostalgic Pistol Grip Shifter

What great 3D resin printed shifter for a 1:25 / 1:24 scale Muscle Car, Street Rod, or Rat Rod build! Height = 14.0mm.

Black washed for photo purposes, item comes gray resin.

Just $1.25 each plus shipping.

SH_11

Nostalgic Pistol Grip Shifter

What great 3D resin printed shifter for a 1:25 / 1:24 scale Muscle Car, Street Rod, or Rat Rod build! Height = 14.0mm.

Black washed for photo purposes, item comes gray resin.

Just $1.25 each plus shipping.

SH_12

Classic Shifter

What can say about this style of shifter other than classic! 3D resin printed 1:25 / 1:24 scale. Great for Street, Strip, Off Road, or Circle Track builds.

Black washed for photo purposes, item comes gray resin.

Just $.99 each plus shipping.

DC_AD1

Driver’s Cockpit Air Deflector

Designed and 3D resin printed by Ron Coon Resins, the DC_AD1 is a must for  builders  building decked interior circle track cars such as Dirt Late Models and IMCA Modifieds. Designed so that the builder can shorten, and or lower deflector by simply sanding. Overall dimensions are  6.3MM height and 21.5MM length, and 24.2MM width.

Just $1.99 each plus shipping.

Item painted for display purposes, comes bare gray resin.

DC_AD2

Driver’s Cockpit Air Deflector

Designed and 3D resin printed by Ron Coon Resins, the DC_AD2 is a must for  builders  building Street Stocks and Hobby Stocks Overall dimensions are  5.5MM height and 14.3MM length, and 16.5MM width.

Just $.75 each plus shipping.

Item comes bare gray resin.

DC_AD3

Driver’s Cockpit Air Deflector

The DC_AD3 is a Five Star, Dominator, etc. style driver’s cockpit air deflector. Designed by Nahuel Customs, modified, resized, and 3D printed by Ron Coon Resins. Steering wheel is for visual sizing only. Dimensions are Height = 5.4mm, Width = 27.7mm, and Length = 18.mm.

Part number is for 1 deflector, steering wheel SW_11 is not included.

Just $1.75 each plus shipping.

WB_2

Driver’s Water Bottle & Holder

The WB_2 is an in car driver’s water bottle and holder. Designed and 3D resin printed by Ron Coon Resins, the WB_2 has amazing detail and is a must for any builder trying to add that extra detail.

Just $1.75 each plus shipping.

PART NUMBER IS FOR ONE BOTTLE AND ONE HOLDER.

WFC_FPC1

Roll Cage

Tired of building roll cages, wish there was an easier way, if so the WFC_FPC1 is for you! Designed and 3D resin printed by WFC Motorsports, this one piece cage will take your build to the next level. Overall dimensions are length = 47.8mm, width = 56.5mm, and height = 37.5mm. Item part number is for 1 roll cage.

Just $7.50 per cage plus shipping.

WFC_FPC2

Roll Cage

Tired of building roll cages, wish there was an easier way, if so the WFC_FPC2 is for you! Designed and 3D resin printed by WFC Motorsports, this one piece cage will take your build to the next level. Overall dimensions are length = 47.8mm, width = 61.8mm, and height = 37.5mm. Item part number is for 1 roll cage.

Just $7.50 per cage plus shipping.

WFC_FPC3

Roll Cage

Tired of building roll cages, wish there was an easier way, if so the WFC_FPC3 is for you! Designed and 3D resin printed by WFC Motorsports, this one piece cage will take your build to the next level. The WFC_FPC3 has 4 left side door bars like many sanctions currently require. Overall dimensions are length = 47.8mm, width = 63.2mm, and height = 37.5mm. Item part number is for 1 roll cage.

Just $7.50 per cage plus shipping.

CAGE TOPPERS

Designed and 3D resin printed by WFC Motorsports exclusively for Ron Coon Resins, the CT_1 and CT_2 cage toppers make building race cars with decking a breeze. The CT_1 was designed to work with the WFC_3 Late Model body but would work great with other full roof applications. The CT_2 was designed to work with the WFC_12 Wedge Late Model but would work great with most partial roof builds. Check the dimensions before ordering to calculate if the cage toppers will work for your specific application. CT_1 overall dimensions are as follows; 2 1/2 wide, 1 1/2″ long, and 1/2″ tall. CT_2 overall dimensions are as follows; 2″ wide. 1 5/8″ long, and 3/8″ tall.

Just $5.99 each plus shipping.

Item comes bare  resin.

WFC_FPC2

Roll Cage

Tired of building roll cages, wish there was an easier way, if so the WFC_FPC2 is for you! Designed and 3D resin printed by WFC Motorsports, this one piece cage will take your build to the next level. Overall dimensions are length = 47.8mm, width = 61.8mm, and height = 37.5mm. Item part number is for 1 roll cage.

Just $7.50 per cage plus shipping.