MC_1

Old School Dual Brake Master Cylinder

MC_1 The MC_1 is a cool Old School Dual Brake Master Cylinder. It has molded firewall mount as well as enough “meat” to be drilled for those who want to go the extra mile and install brake lines.

Just $.50 each plus shipping!!!

MC_2

Single Cylinder Brake/Clutch Cylinder

MC_2 The MC_2 is a single cylinder master cylinder that would be used as a clutch slave cylinder or a master cylinder for a single or dual master cylinder brake set up.

Just $ .50 each plus shipping.

Item painted for display purposes, comes bare white resin.

MC_3

Tri Master Cylinder

MC_3  The MC_3 is a tri master cylinder set up like you will find on real race cars. Two are used for front and rear brakes while the third is used for the clutch. CAD designed and 3D resin printed by Ron Coon Resins.

Just $1.49 each plus shipping.

MC_4

Old School Hand Clutch / Brake

MC_4 The MC_4 is a cool Old School Hand clutch set up like you would find in vintage Mods and Super Mods. The MC_4 could also be used as a hand brake set up like you would find in vintage open wheel cars and dragsters. CAD designed and resin 3D printed by Ron Coon Resins.

Just $1.50 each plus shipping!!!

HB_1RCR

ASA Style Hub

HB_1RCR The HB_1RCR gives you the ASA kit hub look at a lower price. Will work with all Ron Coon Resins Wide 5 style wheels, most other aftermarket Wide 5 style wheels, and the Revell ASA kit wheels. NOTE: will not work with ASA kit front spindles or quick change rear end.

Just $ .99 each plus shipping.

Item painted for display purposes.

HB_1ASA

ASA Style Hub

HB_1ASA Hub The HB_1ASA is recessed on the backside to fit Revell ASA kit spindles and quick change rear end. Will work with all Ron Coon Resins Wide 5 style wheels, most other aftermarket Wide 5 style wheels, and the Revell ASA kit wheels.

Just $1.25 each plus shipping.

Item painted for display purposes.

HB_2

The HB_2

The HB_2 is designed to be used with Ron Coon Resins HB_1ASA hubs as well as Revell ASA kits. Can be used with HB_1RCR hub with minor modification.

Just $1.05 each plus shipping.

HB_3

Hub and Rotor

The HB_3 is the combination of a  HB_1ASA hub and a  HB_2 rotor, discounted to save the builder some $$$.

Just $2.15 each  plus shipping.

HB_4

Finned  Brake Drum

The HB_4 is a Finned  Brake Drum. It measures 3/16″ thick and 9/16″ in diameter.

Just $1.20 each plus shipping.

Item painted for display purposes, item comes unpainted.

HB_5

Wide 5 Hub With 4 Bolt Dust Cap

The HB_5 is just a good looking ol’ school Wide 5 Hub With a 4 Bolt Dust Cap. 37/64 diameter, 7/32″ deep. NOTE: Application is for front hub only!

Just $1.10 each plus shipping. 

Items do not come painted.

HB_6

Wide 5 Hub With 8 Bolt Drive Flange

The HB_6 is just a good looking ol’ school Wide 5 Hub With an 8 Bolt Drive Flange. 37/64 diameter, 7/32″ deep. NOTE: Application is for both front and rear hub!

Just $1.10 each plus shipping.

Item does not come painted.

HB_7

Combination 4 Bolt/8 Bolt Hub

The HB_7 is a combination of a Four Bolt Hub (HB_5) and an Eight Bolt Hub (HB_6).  37/64 diameter, 7/32″ deep.

Just $2.10 for the pair plus shipping.

Item does not come painted.

HB_8

Old School Drum Brakes & Backing Plate

HB_8 Oh Yeah, cool Old School Drum Brakes and Backing Plate all in one!!! Will work with all Ron Coon Resin tires to date with the proper adhesive, except for the W5_9 tires. If using hollow kit tires, these will only work on 5/8″ center holes.

Just $1.20 each plus shipping.

Tire not included; item does not come painted.

COMBO_1

Combo Pack 1: Wheels, Back Halves, Rotors & Hubs

Save yourself some of that hard earned cash with the COMBO_1. The COMBO_1 consists of 4 W_16 Wheels and Back Halves, 4 HB_1ASA Hubs, and 4 HB_2 Rotors.

Just $13.55 plus shipping.

Items do not come painted.

COMBO_2

Combo Pack 2: Wheels,Hubs & Backing Plates

  Save yourself some of that hard earned cash with the COMBO_2. The COMBO_2 consists of 4 W_15 Wheels , 4 HB_1RCR Hubs, and 4 W_17 Backing Plates.

Just $11.55 plus shipping.

Tire not included, items do not come painted.

COMBO_3

Combo Pack 3: Backing Plates, Hubs & Wheels

With the COMBO_3, you’ll save some of that hard earned cash. The COMBO_3 consists of 4 W_15 Wheels , 4 HB_1RCR Hubs, and 4 W_19 Backing Plates.

Just $11.55 plus shipping.

Tire not included, items do not come painted.

HB_9

Rotor With Performance Caliper Insert

Are you tired of generic boring backing plates? If so the HB_9 is for you. The HB_9 is a Rotor with Performance Caliper Insert that will work with virtually any 1:25 and 1:24 scale backing plate.

Just $ .55 each plus shipping.

Painted to show detail. Item comes bare resin, backing plate not included.

HB_10

Maximum Size Rotor and Race Caliper

Are you tired of generic boring backing plates? If so the HB_10 is for you. The HB_10 is a Maximum Size Rotor and Race Caliper like you would find on pavement cars or heavy dirt cars.  Insert will work with virtually any 1:25 and 1:24 scale backing plate.

Just $ .55 each plus shipping.

Painted to show detail. Item comes bare resin, backing plate not included.

HB_11

Wide 5 Adapter

You asked, you got! The HB_11 is a 5 x 5 to Wide 5 Adapter made primarily for you detail guys who are planning on displaying with the rims and tires off. Will fit all current Ron Coon Resins Wide 5 rims, as well as some other aftermarket Wide 5 wheels.

Just $1.69 each plus shipping.

Painted for display purposes only, items come bare resin, wheel not included.

HB_12

Wide 5 Adapter

Oh heck yeah!!! The HB_11 is a 5 x 5 to Wide 5 Adapter! Will fit all current Ron Coon Resins Wide 5 rims, as well as some other aftermarket Wide 5 wheels.

Just $1.49 each plus shipping.

Painted for display purposes only, items come bare resin, wheel not included.

HB_13  

Drum Brake Insert

Are you tired of generic boring backing plates? If so the HB_13 is for you. The HB_13 is a Drum Brake Insert that will work with virtually any 1:25 and 1:24 scale backing plate.

Just $.55 each plus shipping.

Painted to show detail. Item comes bare resin, backing plate not included.

HB_14

Scalloped Rotor With Brake Caliper

Are you tired of generic boring backing plates? If so the HB_14 is for you. The HB_14 is a Scalloped Rotor with Brake Caliper like you would find on modern  pavement or dirt cars.  Insert will work with virtually any 1:25 and 1:24 scale backing plate.

Just $.65 each plus shipping. 

Painted to show detail. Item comes bare resin, backing plate and tire not included.

HB_15

Scalloped Brake Rotor

The HB_15 is a Scalloped Brake Rotor designed to be used in either diorama builds or for those builders that want to make their own brake calipers or use aftermarket brake calipers.

Just $ .65 each plus shipping.

Painted to show detail, item comes bare resin.

HB_16

Heavy Duty Wide 5 Hubs

We started with our extremely popular HB_1RCR hub, worked the casting to give it a bit more heavy duty look and added the much asked for four bolt front cap creating the Heavy Duty Hub With Bolt Caps & Bold Plate. The HB_16 is sold in sets of four, which includes two front four bolt caps and two rear eight bolt drive plates.  Lug nut studs may have to be removed depending on wheels being used. Will fit all current Ron Coon Resins Wide 5 rims, as well as some other aftermarket Wide 5 wheels.

Just $4.25 per set plus shipping.

Items painted for display purposes only, items come bare white resin. Tire and wheel not included.

HB_17

Modern Light Weight Wide 5 Hubs

The HB_17 is our version of a Modern Style Light Weight Wide 5 Hub. This set would be an awesome addition to any build using Wide 5 wheels. The HB_17 will work with all Ron Coon Resins Wide 5 wheels as well as most other 1:25 / 1:24 scale aftermarket Wide 5 wheels. The HB_17 consists of a set of four hubs, two fronts with a low friction style bearing cap and two rears with small diameter five bolt drive plates. The HB_17 master was designed, and 3D resin printed by WFC Motorsports. Item comes as cast white bare resin. Item painted for photo purposes only, wheel, tire, and decal not included.

Just $4.80 per set

Item comes as cast white bare resin. Item painted for photo purposes. Wheel, tire, and decal not included.

SP_1

Spindle

SP_1  The SP_1 is a Wheel Spindle for both scratch and kit builders. It is designed to fit AMT/ERTL 1:25 scale NASCAR chassis’, replacing the kit spindle when either aftermarket or kit spud type backing plates are to be used. The SP_1 has been fabricated to keep kit ride height intact. For best fit it is recommended backing plate spud be drilled out to 1/16”.  Wheel. tire, backing plate, chassis, and brake insert not included.

Just $1.14 per pair, plus shipping. 

Item painted for display purposes, item comes bare resin.

HB_18

Truck Hub

HB_18 The HB_18 is an old school truck hub used in the earlier years of circle track racing before aftermarket versions took over. Great for early open wheel and full fender builds. The HB_18 is a front hub only. Will work with all RCR Wide 5 wheels. CAD designed and 3D resin printed by Ron Coon Resins.

Just $1.10 each, plus shipping. 

Tire and wheel not included.

HB_19

Truck Hub

The HB_19 is an old school truck hub used in the earlier years of circle track racing before aftermarket versions took over. Great for early open wheel and full fender builds. The HB_19 can be used as a front or rear. Will work with all RCR Wide 5 wheels. CAD designed and 3D resin printed by Ron Coon Resins.

Just $1.10 each, plus shipping. 

Tire and wheel not included.

HB_20

FRE Hub

The HB_20 was designed and 3D resin printed by Ron Coon Resins to resemble an old school Frankland Racing Enterprises Wide 5 hub. The HB_20 is a front hub only.

Just $1.10 each, plus shipping. 

Wheel, tire, and tire decal not included.

HB_21

FRE Hub

The HB_21 was designed and 3D resin printed by Ron Coon Resins to resemble an old school Frankland Racing Enterprises Wide 5 hub. The HB_21 is a rear and or front hub.

Just $1.10 each, plus shipping. 

Wheel, tire, and tire decal not included.

HB_22

Vintage Finned Wide 5 Hub

The HB_22 is a vintage finned Wide 5 hub used for many years. Great for early open wheel and full fender builds. The HB_22 can be used as a front hub only. Will work with all RCR Wide 5 wheels. CAD designed and 3D resin printed by Ron Coon Resins.

Just $1.10 each, plus shipping. 

HB_23

Vintage Finned Wide 5 Hub

The HB_22 is a vintage finned Wide 5 hub used for many years. Great for early open wheel and full fender builds. The HB_22 can be used as a front or rear hub. Will work with all RCR Wide 5 wheels. CAD designed and 3D resin printed by Ron Coon Resins.

Just $1.10 each, plus shipping. 

HB_24

Rotor And Caliper

The HB_24 is a really nice 1 piece rotor and caliper designed and 3D resin printed by WFC Motorsports. Dimensions are rotor = 11.7mm, rotor/caliper = 13.0mm and overall width = 3.4mm.

Just $2.55 per set of 4 plus shipping. 

HB_25

Rotor And Caliper

The HB_25 is a really nice 1 piece rotor and caliper designed and 3D resin printed by Ron Coon Resins. Dimensions are rotor = 11.8mm, rotor/caliper = 13.0mm and overall width = 5.2mm. Hole is sized for 1/16″ axle. Items come on supports that must be removed by builder.

Just $2.55 per set of 4 plus shipping. 

HB_23

Vintage Finned Wide 5 Hub

The HB_22 is a vintage finned Wide 5 hub used for many years. Great for early open wheel and full fender builds. The HB_22 can be used as a front or rear hub. Will work with all RCR Wide 5 wheels. CAD designed and 3D resin printed by Ron Coon Resins.

Just $1.10 each, plus shipping. 

HB_24

Rotor And Caliper

The HB_24 is a really nice 1 piece rotor and caliper designed and 3D resin printed by WFC Motorsports. Dimensions are rotor = 11.7mm, rotor/caliper = 13.0mm and overall width = 3.4mm.

Just $2.55 per set of 4 plus shipping.